Jump to content


BakemonoRicer

Member Since 30 May 2012
Offline Last Active Yesterday, 10:43 AM
-----

Topics I've Started

EOI: Big spec SR20 Turbo setup. 6Boost T3 Hi-Mount Mani, Turbosmart Hypergate 45 &...

13 December 2017 - 09:22 PM

All,

For sale is a test-fitted and unused hi mount turbo setup . It hasn't seen any mileage AT ALL, and is currently test fitted sitting on the car.

6Boost
-Manifold has been ceramic coated silver by craved coatings in QLD.
-The exhaust manifold flange is full billet. 6boost did a limited run of these back in 2016 and they're a work of art. They didn't reach the mainstream as they are simply too time consuming to manufacture.
-T3 Single Scroll w/ 45mm v-band, kickass manifold.

Turbosmart Hypergate
-It's a black hypergate w/ 45mm v-band to suit manifold.

GT3071R
-Same spec as the HKS2835 PRO S.
-Expect full boost around 3.5k mark with poncams.
-Most of you looking at this will know its the real 3071R - not the lesser cropped version with the T25 ass end.
-As used on HKS Genki D1GP Silvia and the Kei Office Sil - plenty of videos out there
-It features 4" inlet, v-band dump flange, and T3 manifold flange.
-Will include V-band flange & clamp for buyer.


This setup is perfect for a solid street thrasher which holds its own on the circuit. Sxdevelopments were doing 1.04 laps around Wakie and 1.39 around SMP GP with this same setup (on 98 octane). On E85 the thing will be hypo.....so why am I selling?

Reason for sale is simple - I had a head built in Japan by NAPREC. The portwork thats been done is completely nuts, so is the work in the combustion chamber. Talking to a tuner who does a number of WTAC cars - to get the goodness out of the head we are going with a big $$ EFR setup w/ T4 flange. We're aiming for 550whp .... so now it'll be geared solely towards circuit.

At this stage its an EOI, once my other setup arrives from USA the sale will be final & the manifold/turbo/gate will be removed for the buyer.

Asking price is $3350, I'm slightly negotiable and located in Sydney.

Posted Image

Posted Image

Apexi Power Intake / Bosch Z32 AFM

22 October 2017 - 06:24 PM

Brand new never used. Bought direct from Japan, no longer needed as my build is going different direction with full wire in ECU.

$340 pickup from redfern or botany.

Thanks fellas.

Posted Image

Posted Image

NISSAN S15 STREET/TRACK SPECIAL - HEAD BUILT BY NAPREC

22 May 2017 - 08:37 PM

I picked up the S15 back in 2012 from a 50 yr old lady owner who had owned the car since brand new.

The subframe came out in 2015...adding in Yanack solid diff bushes & solid rear knuckle bushes, Nismo reinforced subframe bushes & LCA's to compliment the HKS/Ikeya Formula suspension setup (which was installed near the start of the build). The standard clutch let go fairly early on and it was replaced with an ORC 559 twin plate solid centre clutch.

Posted Image

The rear guards were rolled to accept a set of VOLK TE37SL's 17x9 +22. With the AD08R's these mods transformed the look & handling of the car. The bootlid is a carbon piece from Sunline Racing.

Posted Image

Posted Image

I'd accumulated a heap of parts from Japan and after taking the car off the road in Nov 2015 I got to work installing all the bits & pieces. The pictures below show the stage I reached before me & an engine builder mate decided to take off the head off & send it to NAPREC in Japan for a full big valve build. More to come later

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

Nismo/Nissan/Circuit Sports/HKS/Remsa Parts

08 May 2016 - 01:39 PM

I'm saving for an RX7 so I'm offloading a small bunch of parts for Nissan,

Im located in Sydney but can ship at no extra cost as long as you are located in Australia

Prices below.

+NISMO S15 LOW TEMP THERMO $70 (NEW)
+NISSAN OEM S15 POWER STEERING RACK BOOT KIT $80 (NEW)
+RARE EARLY 00's HKS TURBO TIMER TYPE 1 (RARE) W/ HARNESS $100 (1000KMS USE)
+HID KIT HARNESS $50
+BRAND NEW REMSA S15/Z32/R33 GTST/R32 GTR NONVspec BRAKE PADS FRONT $70 (suits street/mountains).
+CIRCUIT SPORTS SOLID ENGINE MOUNTS S15 - 5000KMS USE - $75
+ DOUBLE BRAIDED STAINLESS STEEL FLEX 3" PIPE - $45
+ NISSAN Z33 REAR HUB SEALS - $65


Posted Image

Posted Image

Posted Image

Various S15 Bits for Sale - Top Secret, OEM, HKS, Nismo, Cusco

14 January 2016 - 09:03 PM

Getting rid of assorted bits to fund a high mount turbo build....

Brand New Nismo Low Temp Thermostat --- > $70
Brand New Top Secret DragR Flush Mount Hood Pins Lockable Type ---> $190 (RRP $300+ Landed)
Discontinued & Rare HKS Turbo Timer Type 1 (Used for 1000kms, light scuffs on base as it sat in my centre console) ---- > $70
Turbo Timer Harness (used for 1000kms) -----> $25
Circuit Sports Solid Engine Mounts - 8,000kms use. Would suit drift car, it'll lower the engine ~20mm. ----> $80 (typically $150 landed from USA).
Brand New Genuine OEM S15 Power Steering Rack Boot Kit (includes clamps) ----> $75
Cusco Tension Bar. Average condition (paint chips & one of the nuts is seized just meaning you need to adjust it to length a different way). Fits & works fine. ----->$40 (cheap as fk)
OEM BNR34 V-Spec II Nur Accelerator Pedal. Straight fit for 200sx's with GT pedal arms. Light use >200kms. -----> $60

Parts will be available for pick up in Sydney from 25/01 onwards, they're currently in storage at my parents house. If you want pics pm me

Don't expect them to last long, as always I will put them on hold for whoever gets in first. Cheers

Common Links

  • About Us
  • Privacy Policy
  • User Agreement
  • Help & Support Forums
  • Advertise
  •  

    By your continued use of this site, you agree to follow all Rules & Guidelines and abide by the User Agreement outlined in our Terms & Conditions.

    Hardtuned Network is hosted by Sanity Technology

    Design, Site Management & Hotness provided by Loz.

    Big thanks to all our members and volunteers for making this network what it is today!