Search the Community
Showing results for tags 'hubs'.
Found 4 results
Hi guys, Clean up sale. 180sx exhaust. 3" steal, punched cat, sits very high $50 Pair of front 4x114.3 s13 hubs. Bearings done 3 years ago. $40 Pair of 4x114.3 25mm bolt on spacers $50 Set of conversion spacers to suit 5x108(Volvo) to 5x114.3 $60 S13 axles. 6 bolt 2x passenger side and 3x drivers side $40 each. Location Brisbane, wynnum Text me 0422067579
Hi all, Just have a few things for sale. gktech hicas lock bar. Suits - Nissan 180sx - Nissan S13 Silvia - Nissan Skyline R32 GTS-T - Nissan Skyline R32 GTR $50 SOLD R33 skyline front upright and hubs. L+R $20 Single s13/180 Tie rod and end. Tie rod is unknown brand but beefy compared to standard one. Both ball joints in great condition. The other standard one is shagged but you can have it if you want. $20 180sx early model rear lights. $50ono s13/180sx driver side door card with electric window module and handle. $50 s13/180sx Driftworks adjustable tension brace new. $80 s13/180sx full brake setup - 4 calipers, hubs and discs. Discs are bit rusted from sitting oustide but still good. Recently resurfaced. $50 Set of 16" Enkei racing s rims. 16*7 +32 16*8 +38 4x114.3 They've got Bridgestone potenza re001's on them plenty of tread 205/55/16. $400 All parts are located in S.E. Melbourne. Sorry don't have time to post. Any inquiries please post here or pm me thanks =)
Hey guys, I've been searching around many forums and haven't really found a very definitive answer on this specific topic especially since it seems everyone has a different name for each part and it's hard to understand. So I've attached a photo to be more specific. Sorry but I'm still a noob with this kinda stuff, but just want to do the job right first time. Currently looking at parts to buy to do 5 lug conversion on my S13 (just the front for now), there's a few people selling some R32/33 front axle assemblies including the lines, rotors, callipers, hubs and knuckles... I know from the guide that most of the R32/R33 brakes (rotors and callipers) will fit after putting on S14/15 5 stud hubs, but I'm wondering if the R32/33 wheel hubs themselves would fit onto the S13 knuckle spindles after removing them by taking out the wheel bearing lock nuts. That way I can just buy the one part without screwing around with S14/15 hubs and LCAs, or getting aftermarket ichiba hubs and the like. Has anyone ever specifically tried this before? Cheers